Pneumatic Forklifts

Widely utilized in delivery facilities, the pneumatic lift truck or pallet truck, may be utilized to move materials that are placed onto pallets. A pneumatic lift truck commonly has a pair of steel forks installed on a wheeled counterweight that also has a pump. The pump is used to lift and lower the forks.

Visually inspect the pallet lift prior to loading. Make sure the wheels are free of any possible obstacles. In addition, ensure the handle moves fluently and turns properly. Check the pallet before moving it to assess if it is stacked in a way that minimizes the chance of anything falling off during lifting. Discharge any air in the pump and let down the forks to the floor by squeezing the handle installed on the inside of the metal loop on the end of the lever. Slide the blades into the slots in the pallet and make sure the blades are centered so that the pallets’ mass is evenly dispersed.

By pumping the pneumatic jack handle the forks will rise from the ground. Once there is full clearance, you can stop pumping as there is no need to elevate the lift anymore. To move the pallet lift, you can lug the handle behind you. It is not recommended to push the pallet truck. There will be a huge amount of momentum existing. Avoid quick or sharp turns and don't stop too suddenly. Gently bring the pallet to a halt wherever you would like to park it. Squeeze the handle inside the handle end to restore the blades to the floor. Withdraw the blades and return the pallet lift to a fitting parking area or continue onto the next job.

Click to Download the pdf